Application

Drinking Water

Treating primary and secondary contamination

Why it matters?

Drinking Water Treatment

Drinking water sources such as groundwater, reservoir water, lake or pond water are open to contamination. Hence, the appropriate treatment is necessary to remove disease-causing pathogens. Public or Municipal drinking water systems use various methods for urban water treatment water to provide safe drinking water. Access to clean drinking water continues to be a challenge in many developing countries. It’s a sad fact that people still suffer and die due to water-borne diseases.

Our solutions Enquire now


Electrochlorinator

This is the flagship product of Pristine Water, this can produce a strong disinfectant from common salt, water, and electricity. In areas where electricity is unavailable, the Electro chlorinator can also run on Solar Power or Hydro Power. These low-cost systems are simple to install and operate and use natural and simple consumable- just sat and water. Though there are different ways to Chlorinate water like Chlorine Gas, Bleaching Powder, Commercial Hypochlorite are available but, all of them have inherent disadvantages as follows:

Chlorine Gas

Bleaching Powder

Commercial Hypochlorite

High Establishment Cost

Need to maintain stock

Liquid chlorine losses its strength due to Sun light, Heat, Agitation.

Requires Trained Manpower

Loss in strength due to moisture

Very unstable chemical, losses its strength easily

High cost in smaller plants.

Bleaching Powder causes sludge in the reservoir/tank, makes the water alkaline and corrosive

Due to higher amount of Caustic present in it, is highly corrosive, causing GI pipes to corrode

Danger of Chlorine Leakage

  

 


Hypo Produced by ELECTRO CHLORINATION is THE BEST DISINFECTANT

  • Because it can be locally Produced using Salt, Water and Electricity
  • Maintains constant strength
  • Fresh disinfectant is produced daily
  • No need for dosage modulation
  • No need for storage of chemicals in bulk, saves space.
  • Easy to use system in Rural areas
  • Very Effective Disinfectant-Destroys most of the Pathogens In minutes
  • Is a Time-Tested Product, it has been in use for more than 30 years in all developed countries

Chlorine di-oxide generator

Chlorine Dioxide Generator

Pristine Water‘s Kloroxide produces Chlorine dioxide in a safe and easy process. It is used to treat drinking water to kill bacteria, viruses, and parasites that can make people sick: Disinfectant: Chlorine dioxide is an effective disinfectant that kills bacteria, viruses, and parasites like Cryptosporidium and Giardia.

  • Disinfectant: Chlorine dioxide is an effective disinfectant that kills bacteria, viruses, and parasites like Cryptosporidium and Giardia.
  • Taste and odour: Chlorine dioxide can improve the taste and odour of water.
  • Iron and manganese: Chlorine dioxide can remove iron and manganese from water
  • Chlorine resistant microorganisms: Chlorine dioxide can inactivate chlorine resistant microorganisms.
  • Nitrification: Chlorine dioxide can control nitrification, a microbial process that oxidizes reduced nitrogen compounds.
  • Genotoxicity: Chlorine dioxide can increase the quality of surface water treatment facilities.
Learn more Enquire now
Silver / copper ionizer

Silver/Copper Ionizer

An innovative product by Pristine Water is designed to quickly kill waterborne pathogens and achieve long-term protection without hazardous chemicals. Disinfection with silver ions is a proven and accepted method of inhibiting bacterial growth in drinking water. Silver ions do not add taste, odour or change the composition of the water, like chlorine or other oxidizers. The silver ionizer prolongs the storage time of water for longer periods. In addition, combined with ozone, they achieve a more complete and reliable water treatment.

Learn more Enquire now
fluoride and arsenic removal from driking water

Fluoride and Arsenic Removal

Excessive Arsenic or Fluoride in drinking water cause various health problems. Pristine Water has developed a technique which can easily remove contaminants in drinking water using the process of Electrocoagulation

The same process is successfully used to remove Arsenic and Fluoride from water. This system uses the latest technology in the process of Electrocoagulation and not only reduces the content of contaminants to acceptable limits but also disinfects water.

Learn more Enquire now
RO systems

RO Systems

Pristine Water RO systems are primarily needed for drinking water when the water source has high levels of Total Dissolved Solids (TDS) more than 600 ppm as recommended by WHO or when it contains specific contaminants like heavy metals or organicities that other filter types may not effectively remove.

Pristine Water offers RO systems to be used to turn brackish or even ocean water into potable water.

Enquire now

Our solutions for Drinking Water Treatment

Enquire now

Share your requirements with us, and we'll be delighted to provide the solutions you need


Loading
Your message has been sent. Thank you!